details and description
The upper and lower four driving wheels are fed synchronously, which is powerful and powerful.
The high-torque reduction worm gear box is equipped with a universal joint for smoother feeding
Up and down multiple anti-rebound devices, effectively prevent the wood from rebounding and hurting people
The feeding speed can be adjusted in multiple gears, and the suitable speed can be selected according to different requirements.
Standard laser marking instrument, accurate alignment of wood sawing position, improve wood yield
The automatic oil supply pump automatically supplies oil to the key parts of the transmission
Mist spray device, prolong the service life of the saw blade and reduce the amount of water received by the wood.
Equipped with a spindle sleeve, it is convenient and quick to remove the saw blade
Use and Features
1. This machine is specially used for the production of modified materials, wood strips and wood core boards. According to the preset size, multiple wood strips can be sawed out in one feeding. The feeding wheel is used to feed the material, and the upper and lower feeding wheels are used for synchronous feeding.
2. There are 6 groups of upper feeding wheels. The pressure of pressing the wood is controlled by the pressing cylinder, which can be adjusted freely depending on the hardness of the wood.
3. The feeding speed adopts speed regulation, which is easy to adjust and maintain.
4. The feeding wheel feed is more economical than the crawler feeding, and it is easier to control and maintain. The pressing material adopts the air pressure type, so even if the thickness of the wood changes greatly, the pressing pressure is also fixed, and the thickness of the pressing material is wide, up to 35 mm.
5. Electric adjustment of the upper feeding wheel frame and the lifting and lowering of the saw blade spindle is easy to operate.
6. The saw blade spindle can be lowered to make the saw blade leave the saw blade work surface, and it is easy to replace the saw blade.
7. The main shaft is made of special alloy steel, which has been heat-treated and ground for many times.
8. The main shaft adopts large-sized and high-grade bearings, which are load-resistant and have a long service life.
9. The upper and lower film groups are equipped with side baffles to protect the operator.