The upper six and the lower four feeding wheels are synchronously feeding, which is strong and powerful, and the interval between the feeding wheels is minimized, which is more suitable for short material processing

The high-torque reduction worm gear box is equipped with a universal joint for smoother feeding

The upper and lower anti-rebound device can effectively prevent the wood from rebounding and hurting people

The feeding speed is adjustable in nine gears, and the appropriate speed can be selected according to different requirements

Saw shaft, feeding electric lifting, according to the thickness of wood processing, quickly adjust the lifting height

The water spray device in the shaft prolongs the service life of the saw blade and minimizes the amount of water received by the wood.

Polyurethane bridge board, improve sawing accuracy, economical and durable

Equipped with oil supply system, maintenance is more convenient and fast

1. This machine is specially used for the production of modified materials, wood strips and wood core boards. According to the preset size, it can saw multiple wood strips with one feeding. The feeding wheel is used to feed the material, and the upper and lower active feeding wheels are used to feed the material synchronously and powerfully.

2. There are 6 sets of upper feeding wheels and 4 sets of lower feeding wheels. The feeding is strong and powerful. The pressure of pressing the wood is controlled by the pressing cylinder, which can be adjusted freely depending on the hardness of the wood.

3. The feeding speed can be changed steplessly, and can be adjusted elastically according to the nature of the wood.

4. Feeding wheel feeding is more economical and safer than crawler feeding, and it is easier to control and maintain. The pressing material adopts air pressure type, so even if the thickness of the wood changes greatly, the pressing material pressure is also fixed, and the thickness of the pressing material is wide, up to 25 mm.

5. Electric adjustment of the upper feeding wheel frame and the lifting and lowering of the saw blade spindle is easy to operate.

6. The upper feeding wheel can be lifted off the table, and it is convenient to maintain and remove the dust accumulation of the feeding wheel.

7. The saw blade spindle can be lowered to make the saw blade leave the saw blade work surface, and it is easy to replace the saw blade.

8. The diameter of the main shaft is 50 mm, which is made of special alloy steel, and has been processed by multiple heat treatments and precision grinding.

9. The main shaft adopts large-scale high-precision bearings, which are load-resistant and have a long service life.

10. Up and down safety film set to protect the safety of operators.

11. The saw blade cooling device prolongs the service life of the saw blade and reduces the cost of purchasing the saw blade

12. Under the same sawing height, a smaller diameter and thinner saw blade can be used, which greatly reduces the loss of wood and saves the cost of purchasing saw blades.

13. The special installation and fixing method of the saw cutting board makes the production and installation of the saw cutting board simple and convenient.